The Antari DarkFX Drive 4 is a compact driver exclusively designed for the Antari DarkFX high-power UV fixtures. Equipped with 4 bare wire terminal blocks for up to 4 fixtures, it can be used to adjust dimmer brightness and strobe speed.The DarkFX Drive 4 is operated in one of two modes: Either in DMX mode with 2 channels via the 5-pin XLR connectors or in stand-alone mode via the LCD display and the 4 operating buttons. Use the powerCON input to connect it to the mains.DMX control unit for a total of 4 Antari DarkFX Strips or DarkFX SpotsVarious dimmer curves adjustableTerminal blocks support four fixturesCan be operated in 2 CH modeThe device is cooled by passive convection coolingControlling by stand-alone; DMXBuilt with NEUTRIK connectorFor further information about this product, please refer to the Data Sheet under "Downloads"Package contents1 x device, 1 x power cord, 1 x user manualPower supply:100-240 V AC, 50/60 HzPower consumption:75 WIP classification:IP20Power connection:Mains input via PowerCON (blue), mounting version power supply cord with safety plug (provided)Power output:1 x PowerCON (gray)DMX channels:2DMX input:1 x 5-pin XLR (M) mounting versionDMX output:1 x 5-pin XLR (F) mounting versionCooling:Passive convection coolingControl:Stand-alone; DMXHousing color:BlackUse of brands:Built with NEUTRIK connectorMaterial:MetalDimensions:Width: 13,5 cmDepth: 21,6 cmHeight: 7,2 cmWeight:1,81 kg

The Antari DarkFX Drive 4 is a compact driver exclusively designed for the Antari DarkFX high-power UV fixtures. Equipped with 4 bare wire terminal blocks for up to 4 fixtures, it can be used to adjust dimmer brightness and strobe speed.The DarkFX Drive 4 is operated in one of two modes: Either in DMX mode with 2 channels via the 5-pin XLR connectors or in stand-alone mode via the LCD display and the 4 operating buttons. Use the powerCON input to connect it to the mains.DMX control unit for a total of 4 Antari DarkFX Strips or DarkFX SpotsVarious dimmer curves adjustableTerminal blocks support four fixturesCan be operated in 2 CH modeThe device is cooled by passive convection coolingControlling by stand-alone; DMXBuilt with NEUTRIK connectorFor further information about this product, please refer to the Data Sheet under "Downloads"Package contents1 x device, 1 x power cord, 1 x user manualPower supply:100-240 V AC, 50/60 HzPower consumption:75 WIP classification:IP20Power connection:Mains input via PowerCON (blue), mounting version power supply cord with safety plug (provided)Power output:1 x PowerCON (gray)DMX channels:2DMX input:1 x 5-pin XLR (M) mounting versionDMX output:1 x 5-pin XLR (F) mounting versionCooling:Passive convection coolingControl:Stand-alone; DMXHousing color:BlackUse of brands:Built with NEUTRIK connectorMaterial:MetalDimensions:Width: 13,5 cmDepth: 21,6 cmHeight: 7,2 cmWeight:1,81 kg