FIBARO - Walli Dimmer

FIBARO - Walli DimmerFIBARO Walli Dimmer is een slimme wanddimmer die is ontworpen om de lichtbron via het de Z-Wave controller te regelen maar ook locaal op de dimmer zelf.Het meet het actieve vermogen en de energie die wordt verbruikt door de gecontroleerde belasting.Te gebruiken in een zwave controller zoals: Fibaro HC2, Fibaro HCL en Domoticz. SpecificationsPower supply110-230V~ 50/60 HzCompatible load typesResistive loads Conventional incandescent and halogen light sourcesResistive-capacitive loads Fluorescent tube lamp (compact / with electronic ballast), electronic transformer, LEDResistive-inductive loads Ferromagnetic transformersRated load current0.22A-1.52A – resistive loads (incandescent and halogen) 0.22A-1.3A – resistive-capacitive loads (fluorescent tube lamp, electronic transformer, LED) 0.22A-1.3A – resistive-inductive loads (ferromagnetic transformers) 0.022A-0.22A – with Bypass 2: fluorescent tube lamp or LEDActive elementsemiconductor electronic switch εRecommended external overcurrent protection10A type B circuit breaker (EU) 13A type B circuit breaker (Sweden)For installation in boxesØ = 60mm, depth ≥ 40mmRecommended wirescross-section area between 1.5-4.0mm2, stripped 12-12.5mm of insulationOperating temperature0–35°CAmbient humidity10–95% RH without condensationRadio protocolZ-Wave (500 series chip)Radio frequency band868.0–868.6MHz; 869.7–870.0MHzMax. transmitting power+6dBmRangeup to 50m outdoors up to 40m indoors (depending on terrain and building structure)Dimensions (Height x Width x Depth)86 x 86 x 51 mmCompliance with EU directivesRoHS 2011/65/EU RED 2014/53/EURadio frequency of individual device must be same as your Z-Wave controller. Check information on the box or consult your dealer if you are not sure.Kijk hier voor de handleiding