SONOFF Orb 4-In-1 Zigbee Smart Scene Button SNZB-01MOne button, sixteen scenesOne remote control for every scene in your home prevents you from having to open apps for every light change or automation. The SNZB-01M offers four physical buttons, each recognizing single, double, triple, and long presses, resulting in 16 separate triggers from one small device.Power and connectivityThe device operates on Zigbee 3.0 (IEEE 802.15.4) and also switches to eWeLink-Remote mode for direct pairing without a Zigbee gateway. Power is supplied by a 3V CR2477 battery, which lasts at least 4 years in Zigbee mode under lab conditions, compared to 2 years in eWeLink-Remote mode.Functionality and settings 4 buttons, each with 4 press types: single, double, triple, and long press Up to 16 configurable scenes, such as "Movie Night", "Sleep", or "Away from Home" Communication range up to 130 meters in open field TouchLink for direct pairing with Zigbee lights such as Philips Hue or IKEA Samsung SmartThings Hub V3 supports a maximum of 12 out of 16 scenes Expansion and accessoriesFor Zigbee use, a Zigbee controller is required, unless you choose eWeLink-Remote mode without a gateway. Also, check out our range of wireless switches for additional home control.Safety and reliabilityScenes are preserved when switching between Zigbee and eWeLink-Remote mode and are only lost during a factory reset (holding the reset button for 5 seconds) or removal from the eWeLink app. The device is designed for indoor use and offers magnetic, adhesive, and screw mounting without permanent damage to walls.Home AssistantIntegration is done via Zigbee2MQTT or via ZHA with a community script, where the device acts as an EndDevice in the network due to battery power. Pairing is done by holding the reset button for approximately 5 seconds until the LED flashes slowly, after which the device appears in Home Assistant. After pairing, action events per button and press type appear instead of separate switch entities, as scene buttons work on events. Local control without a cloud is confirmed via Zigbee2MQTT and ZHA, although ZHA currently still requires an additional script for full support.HomeyAt the time of writing, there is no known official or community app that supports the Orb 4-In-1 in Homey. For Homey users, this is an important consideration before purchasing.Other platformsVia Matter Bridge solutions such as the ZBBridge-U or eWeLink CUBE, the Orb 4-In-1 can be integrated with Apple Home. SmartThings Hub V3 and AeoTec Smart Home Hub V3 are supported, with the aforementioned limitation of a maximum of 12 scenes; NSPanel Pro will receive support from firmware V4.2.0.Automation examples Everyday: single press of button 1 switches on the living room light, double press of button 1 turns off the same light, directly executable as a Zigbee2MQTT or ZHA action trigger Advanced: if button 3 registers a long press and the time is between 10:00 PM and 06:00 AM, dim all bedroom lights to 5% and send a confirmation notification to the Home Assistant app Points of attention No official Homey support known at this time ZHA integration currently still requires a community script, no native support SmartThings Hub V3 supports a maximum of 12 of the 16 scenes CR2477 battery is required; battery life heavily depends on usage frequency Box contents 1x SONOFF Orb 4-In-1 button (SNZB-01M) 1x square mounting base (Fusion style) 2x standard mounting screws for switch plate 1x VHB adhesive tape 1x CR2477 battery 1x installation guide CompatibilityCompatible with Home Assistant (Zigbee2MQTT, ZHA with script), eWeLink, SmartThings, Apple Home via Matter Bridge, and TouchLink lights such as Philips Hue or IKEA. No confirmed Homey support. Model SNZB-01M Product series Fusion Series Product type Zigbee & eWeLink Remote Control Smart Scene Button Protocol Zigbee 3.0 (IEEE 802.15.4) / eWeLink-Remote Number of buttons 4 Press types per button Single, double, triple, long press Maximum number of scenes 16 (12 with SmartThings Hub V3) Power supply CR2477 (3V), included Battery life Zigbee mode ≥ 4 years (lab test, 50 presses/day) Battery life eWeLink-Remote ≥ 2 years (lab test, 50 presses/day) Communication range up to 130 m in open field Mounting Magnetic, adhesive tape, screws Color White Usage Indoor only EAN 6920075743609 Frequently asked questionsDo I need a Zigbee hub for the Orb 4-In-1?For Zigbee mode, a compatible Zigbee controller is required; in eWeLink-Remote mode, the device works without a gateway.Does the Orb 4-In-1 work with Home Assistant?Yes, via Zigbee2MQTT with full native support, or via ZHA with an additional community script, after which the device acts as an event-based trigger in Home Assistant.Is the battery included?Yes, the included CR2477 battery is already in the device and is ready for use immediately after removing the insulation strip.Can I expand or customize the Orb 4-In-1?The button offers up to 16 separate scene triggers through the combination
